|
|
|
|
|
|
CHAINTECH 9EJL2 APOGEE Intel P4 478 Item#: ECT-9EJL2-A |
 |
 |
|
 |
| Close Out Item - This item is warranted through the product manufacturer only |
 |
Click the thumbnails below to enlarge |
|
|
Points Credit : 60 points Currently valued at $1.20 ATX, 400/533MHz FSB Intel? 845PE DDR333, 6ch Audio, USB2.0, LAN Feature Highlights Hardware CPU: Intel P4/Celeron Socket 478 System: Frequency 400/533MHz Chipset: Intel 845PE + ICH4 Memory: (2) PC1600/2100/2700 DDR DIMMs (2GB)
Physical Form Factor ATX Dimensions : 230mm x 305mm
Expansion One 1.5V AGP slot for 4XAGP (v2.0 compliant) Six 32-Bit PCI slots (v2.2 compliant) One CNR slot support modem, audio and LAN riser
AV Subsystems Video : 4XAGP Audio : CMedia 8738-6ch / Optional ACྜྷ Codec
CPU Supports Intel Socket 478 CPU with Hyper-Threading Technology Supports Intel Celeron / Pentium 4 system bus at 400/533MHz
Chipset Intel 845PE + ICH4, supports Hyper-Threading Technology
Main Memory Two 184-pin DDR DIMMs up to 2GB Supports PC1600/2100/2700 DDR SDRAM modules
Expansion Slots One 1.5V AGP slot for 4XAGP (v2.0 compliant) Six 32-Bit PCI slots (v2.2 compliant) One CNR slot support modem, audio and LAN riser
Audio Subsystem Full-duplex operation for simultaneous recording and playback 6 channel speaker audio supports Embedded 32OHM 5w earphone amplifier Supports MIDI and dual game ports 32 Voice HRTF 3D positional audio, CRL 3D supports MS Direct Sound3D, Aureal A3D and Creative EAX APIs Supports SPDIF (optional)
Video Subsystem Video 4XAGP
UltraDMA IDE Ports Supports PIO Mode 4 up to 16.6 Mbps, Multi-Word DMA Mode 2 and Ultra DMA mode 5 up to 100MB/s with Bus Mastering Bus-Mastering software drivers for all common multitasking operating systems
Embedded USB Controller Three EHCI USB 2.0 Controllers support total 6 USB 2.0/1.1 Ports Support USB 2.0 High-Speed Device @480 Mb/s Transfer Rates Optional USB adapter for additional USB2.0/1.1 ports Fast Ethernet/Home Networking Controller On-board LAN chip RTL8100B supports 10/100Mb Fast Ethernet or 1/10Mb HomePNA 2.0
On Board Super I/O Controller ITE 8712 LPC I/O with system monitors hardware Two UARTs support serial ports and IR function (up to 115.2Kbps) for HPSIR and ASKIR One SPP/ECP/EPP parallel port One floppy disk drive connector supports up to 2.88MB Integrates smart card reader function and interface, to be qualified for meeting PC/SC standard
Embedded system monitoring 8 external voltage inputs 2 temperature sensing for CPU and system 2 Fan speed (CPU and system) monitoring with on/off control in suspend
Boot-Block Flash ROM Award system BIOS support PnP, APM, DMI, ACPI, & Multi-device booting features
Software Driver CD (Chipset Autodetect) Value Pack 2002 Thiz Linux 6.0 APOGEE? Overclocking
Other Feature Back panel I/O connector
One PS/2 mini-DIN mouse and keyboard ports Two USB Ports and one RJ45 connector Two 9-pin D-SUB male Serial ports Audio Line-in, Line-out and Mic-in jacks One 15-pin D-SUB female game/MIDI port On board connector for external device.
Three 3x1 pin fan connector Two 5x2 pin USB connectors for additional 4 USB2.0/1.1 ports 6x1 pin Infrared connector 3x1 pin wake on LAN connector with housing 3x1 pin wake on Modem connector with housing 4x1 pin CD-in connector with 2.54mm pitch housing 4x1 pin Aux-in connector with 2mm pitch housing 4x1 pin Mono-in connector with 2mm pitch housing 4x2 pin woofer/center connector for 6-channel audio 5x2 pin SPDIF connector (optional) 5x2 pin front side audio connector 9x2 pin front panel connector 7x2 pin Smart Card Reader connector 5x2 pin USB Power On connector 17x2 pin floppy connector
|
 |
|
This product was added to our catalog on Wednesday November 02, 2005. |
|
 |
Reviews |
 |
 |
 |
 | | There are currently no product reviews. |
|
|
 |
|  |
|
|