|
Points Credit : 12 points Currently valued at $0.24 "Coollaboratory liquid metal" consists of a liquid metal alloy at a 100%. It does not contain any non-metallic additives like silicone, oxides etc. It does not include any solid components either. Due to this composition, which is completely new for heat conducting pastes, it surpasses the best previously existing heat conducting pastes in the heat conductivity value by the factor 9-10, more simple heat conducting pastes by the factor 100. "Coollaboratory liquid metal" is optimised in its composition for the application with high-quality copper coolers. Please do not use any aluminium coolers!
It exclusively consists of high-temperature conductive metals. "Coollaboratory Liquid Pro" does not contain any non-metallic additives. For this reason it has the excellent heat conducting capability. It is liquid at room temperature (like mercury), however, is non-poisonous and has a high moistening capability for the most different materials. "Coollaboratory liquid metal" adheres to the cooler and CPU by means of the effective adhesive powers. It does not need any sealing. Of course, also in case of a vertical installation.
Application of Coollaboratory Liquid Pro must be done carefully with a small, lint-free brush. Coollaboratory Liquid Pro behaves similar to mercury. The material should be evenly applied over the processor. After 48 hours, Coollaboratory Liquid Pro solidifies into its most optimal state to provide the best cooling performance.
More care is required when applying Coollaboratory Liquid Pro versus conventional thermal paste. If you are experienced in dealing with computer hardware, you may want to pick a more conventional, poorer performing thermal paste
Features
-100% metal composition
- VERY high heat conductivity
- Stays in liquid form in ambient room temperature
- Non-toxic
- 100% liquid metal!
- 0.15ml syringe allows for multiple applications
Specifications
1) Coollaboratory Liquid Pro was designed for use with high quality coolers made of copper or silver. Aluminum coolers are unsuitable for use with Liquid Pro.
DO NOT USE ALUMINUM COOLERS! Do not allow Liquid Pro to come in contact with any aluminum surfaces. Aluminum is not resistant against Liquid Pro and will result in damages to any aluminum surface.
2) Like all metals, Liquid Pro may act as an electrical conductor. This creates no problem if applied according to the directions provided, as your cooler is a conductive metal as well. Make sure Liquid Pro Does not touch any electric components. This could lead to short circuit when power is on. If you spill some of the Liquid Pro, wipe it away thoroughly before turning your PC on. Larger quantities can be sucked away with the syringe, or use a paper towel for smaller amounts.
Note: Even non-electricity conducting heat conducting pastes may acquire electric conductibility after some time. The reason is possible contamination with dust and metal particles by the cooling fan.
Please read all instructions downloaded from Liquid Pro website before applying. |
 |
|
This product was added to our catalog on Wednesday April 19, 2006. |
|
 |
Reviews |
|
|
|
| | There are currently no product reviews. |
|
|
|
| |
|
|
Customers who bought this product also purchased |
|
|
|
|
